Filter Man


Wellington Water Filters
Kapiti Pure Water



Phone:  (04) 904 7873
              0800 115 516

Fax:      (04) 902 7875



39 Amohia Street
New Zealand




Mail   Email Us Here







  CBR2-10 Carbon Block Under Bench Purifier


Lead Removal Water Purifier.
Also ideal for Chlorine, Chemicals,
Dirt, Giardia and Cryptosporidium.


The CBR2-10 Purifier is a top quality Carbon Block
Purifier similar to the CB12, but it also has an
"Ion-Exchange" resin to remove heavy metals
such as lead.


Removes or Reduces
Heavy Metals including Lead
Giardia & Cryptosporidium cysts
Chlorine - Chemicals - PCB's
Bad Taste and Odour - Dirt
Sediment - Rust - Algae
Asbestos - THM's

From Only $ 290.00

Including GST and Nationwide Delivery







3 Year Warranty




Taste, Odour, Chemicals, Giardia and Lead Removal


The CBR2-10 extruded activated carbon filter reduces soluble lead using an ion-exchange filter medium with a high specificity for soluble lead. Particulate filtration is used to intercept insoluble lead particles.


It has outstanding Chlorine, Taste, Odour and Chemical reduction. The 0.5 Micron filter size removes Dirt, Sediment, Rust and Algae, as well as Giardia and Cryptosporidium cysts.


The filter medium consists of activated carbon particles fused into a uniform block with enhanced adsorptive capacity and efficiency.

Model Code:   UB CBR2-10
Micron Rating:   Half a micron  (0.5ยต)
Rated Chlorine Capacity:  Up to 40,000 litres
Lead Removal:   Up to 11,000 litres
THM Removal:   Approx 4500 litres
Replacement Cartridge:   $ 85.00 every 12 to 18 months
Removes or Reduces:   Chlorine, Chemicals, THM's, Heavy Metals including Lead,
PCBs from plastic pipes, aluminium sulphate, dirt, sediment, rust, algae, asbestos,
bad taste and odour as well as Giardia and Cryptosporidium cysts


3 Year Certificate of Quality Warranty:
Applies to Under Bench Systems for your peace of mind


Under Bench systems come with your choice of Designer Tap


Make your choice from the above taps. Other models are available on request

DIY Kit -   $ 290.00   ( without pressure limiting valve )
DIY Kit -   $ 315.00   ( with pressure limiting valve )


Installation from only $ 60.00 extra  (depending on your personal requirements)


InfoAbout Pressure Limiting Valves


DIY Price includes delivery - Installation not included
Installed price is that of Wellington Water Filters and Kapiti Pure Water
We can recommend an installer in your local region, but installation prices listed on this website will not apply
Prices include GST

$ 290.00 without Pressure Limiting Valve  GST & Delivery Inclusive
$ 315.00 with Pressure Limiting Valve  GST & Delivery Inclusive


InfoAbout Pressure Limiting Valves

To Purchase Online

Choose your Option... Then just follow the 3 easy steps


Option 1


CBR2-10 CARBON BLOCK Without Pressure Limiting Valve
$ 290.00

Step 1
Select Your Designer Tap

Step 2
Select Your Take-Off Valve

Step 3


Option 2


CBR2-10 CARBON BLOCK With Pressure Limiting Valve
$ 315.00

Step 1
Select Your Designer Tap

Step 2
Select Your Take-Off Valve

Step 3



Note:  We use a high quality cartridge casing which compared to other brands does withstand water pressure and water hammer well. A pressure limiting valve is only required where there is very high water pressure over 120 psi or 840 Kpa. Most installations do not require a pressure limiting valve.


Visa Mastercard

NZ Only - Payment by Visa, Mastercard, or Direct Bank Deposit - Installation Not Included - Prices in $ NZD

We install and maintain Water Purification Systems throughout Wellington,
Kapiti and Horowhenua.


We can also arrange installation in most other areas if required.

We deliver our products anywhere in New Zealand via Courier.


Phone   Address
Phone:   (04) 904 7873
Toll Free:   0800 115 516
Mobile:   027 437 8699
Fax:   (04) 902 7875
  39 Amohia Street *
New Zealand

* State Highway One - Just north of the traffic lights