Korean made,- Easy to change system,- simply twist the cartridge by hand to replace!
Slim design allows for easy installation.
Stage 1: Sediment pre-filter: 5 micron filter removes dust, rust, sludge, particle and suspended sediment.
Stage 2: Carbon Block: Removes chlorine, bad tastes, odours and organic compounds from water. It also reduces a number of chemicals, such as pesticides and herbicides and hundreds of other man-made chemicals that may come into contact with tap water as it proceeds through the system.
Stage 3: Reverse Osmosis membrane to remove Giardia and Cryptosporidium cysts, Bacteria and Viruses, colloids and fine silt, Nitrates, Fluoride and other unwanted contaminants. Thereby producing high-quality pure water.
Stage 4: Post Carbon Block: Acts as a polishing stage to ensure full removal of all chlorine, bad tastes, odours, organic compounds and chemicals from the water.
Colour coded cartridges for easy cartridge replacement.
Components are certified to NSF Standards.
Working pressure: Above 30psi or 210 Kpa. Booster pump provides increased performance in areas with low water pressure ( below 50 psi or 350 kpa).
Strong design,- Hydrostatic burst pressure: minimum of 600psi, Impulse test: 0-150psi for 100,000 cycles,
Inlet/outlet size: 1/4″ tubing with quick fit connectors.
Easy change ‘Twist and click’ system with valved heads so no water spillage!
Complete with high quality chrome plated brass tap.
Options of standard unit where good mains water pressure is present or addition of a silent booster pump for areas with low water pressure. (Note at least 20 psi or 140 kpa required to activate the pump)
This page is for the Booster pump model. Please see our other page for the standard system.