5- UB GAC KDF 30/1 Slimline

$ 264.00 (Incl GST)

Availability: In Stock

Description

This uses an American made cartridge which is a small sealed unit which when installed under the sink, takes up very little space, and can be mounted either vertically or horizontally. It removes a wide range of chemicals and heavy metals, while retaining the beneficial minerals in the water. The one micron mesh filter also removes very fine dirt and sediment and is effective at removing both Giardia and Cryptosporidium cysts. The cartridge has a bacteriostatic nature which will allow the cartridge to remain hygienic for up to three years. In practise, most families need to replace the cartridge every 24 months maintain a high quality water supply

Cartridge Code                       GAC / KDF 30/1

Micron rating                          One micron (1u)

Rated Chlorine Capacity        Up to 30,000 litres

THM removal                          Approx 2000 litres

Recommended Max flow rate 4 litres per minute

Replacement cartridge            $120.00 every 2 to 3 years  ( availble on our web site for $99.00)

Removes                                 Chlorine, Chemicals, PCBs from plastic pipes, dirt, sediment, rust, algae, asbestos, bad taste & odour, aluminium sulphate, heavy metals as well as Giardia and Cryptosporidium cysts.

Options

 1 ) The Default Price does not include a pressure limiting valve ( PLV ) that is required for insurance purposes if you have high water pressure and do not have a PLV installed to the house supply.  All modern homes have these fitted, but houses built before 2010 may not. If in doubt choose to fit one as we are only charging cost price and it provides good protection against high pressure damage to the filter casing and potential water leaks. 

The purpose of the PLV is to stop high water pressure and "Water Hammer'  from cracking the filter casing.  Water hammer is a sudden burst of pressure  caused by sudden closing of water valves and is common with modern ceramic taps, dishwashers and washing machines.   We use high quality NZ Apex Branded valves for an extra $35.00. Cheaper Chinese models are available on request .

 2) There are a range of taps and connection valves to choose from. Please choose the options to suit. your installation

 

Specifications

Cartridge Length  250 mm

Cartridgfe Diameter  64 mm

Maximum water pressure tolerance of 125 psi or 875 kpa